come back to -Home

Mast Climbing Work Platform - China

Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor

Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor

Our STC mast climbing work platform is a good solution for work on facades of high and super high rise buildings. It is suitable for facade painting, cleaning, face brick mounting, curtain wall installation, welding of external wall steel structure, and more. The mast climbing work platform is especially great for construction applications where installation of suspended scaffold is impossible or high operating stability and safety is required.

Features of Mast Climbing Work Platform

1. The length and width of our mast climbing work platform are adjustable, so as to suit building's different facade shapes. In addition, some parts of the work platform are telescopic. This enables the platform to be combined into concave-convex shape that fits the building external wall shape, thus better meeting the work requirement.
2. The use of our mast climbing work platform involves no base prefabrication, which greatly facilitates change of work locations.
3. This construction equipment is equipped with many protection devices.
a. The electrical system is designed with creepage, overheat and phase sequence protectors.
b. The work platform uses auto reset upper/lower limit switch and ultimate limit switch without auto reset function, which provide double protection to avoid overtravel at the top and bottom.
c. The overload sensor helps eliminate over-torque operation of the mast climbing work platform.
d. The double mast climbing work platform has an automatic leveling mechanism to automatically adjust the synchronous lifting operation of the two drive devices of the double mast, which can effectively control the work platform tilt. The vertical tilt angle is controlled within 2 degrees.

Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor

Single Mast Climbing Work Platform

Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor

 

 

 

 

 

 

 

 

 

Basic Configuration of Single Mast Climbing Work Platform

Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor

1. Mast section 2. Drive unit 3 .Long balstrade 4. Short balustrade 5. Long platform 6. Short platform 7. Electrical system 8. Base frame 9. Ladder 10. Side frame 12. Mast tie 13. Electrical winch



Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor
TECHNICAL DATA OF SINGLE MAST CLIMBING WORK PLATFORM
MODEL STC100
RATED LOAD WHEN THE PLATFORM REACHES ITS MAX. LENGTH 1000 kg
MAX. CARRYING CAPACITY 3 persons
RATED LIFTING SPEED 8.3 m/min
MAX. OPERATING HEIGHT 150 m
THE DISTANCE ABOVE THE LAST TIE-IN 4.0 m
MAX. LENGTH OF PLATFORM 8.8 m
BASIC PLATFORM WIDTH 1.5 m
MAX. PLATFORM WIDTH AFTER EXTENSION 2.5 m
THE FIRST TIE-IN FROM THE GROUND 3-4 m
TIE-IN SPACING about 6m
STANDARD SECTION SIZE 1508x500x500 mm
MOTOR MODEL TYHI100L 1-4
MOTOR POWER 2x2.2 kW



Double Mast Climbing Work Platform

Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor















Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor Mast Climbing Work Platform manufacturer,China Work Platform Manufacturer,Overload Sensor
TECHNICAL DATA OF SINGLE MAST CLIMBING WORK PLATFORM
MODEL STC100
RATED LOAD WHEN THE PLATFORM REACHES ITS MAX. LENGTH 1400 kg
MAX. CARRYING CAPACITY 6 persons
RATED LIFTING SPEED 8.3 m/min
MAX. OPERATING HEIGHT 150 m
THE DISTANCE ABOVE THE LAST TIE-IN 4.0 m
MAX. LENGTH OF PLATFORM 23.6 m
BASIC PLATFORM WIDTH 1.5 m
MAX. PLATFORM WIDTH AFTER EXTENSION 2.5 m
THE FIRST TIE-IN FROM THE GROUND 3-4 m
TIE-IN SPACING about 6m
STANDARD SECTION SIZE 1508x500x500 mm
MOTOR MODEL TYHI100L 1-4
MOTOR POWER 4x2.2 kW